Lens height (the B measurement) explained
One glasses size is not printed on the arm: the lens height. It changes how the frame looks on you.
Tall or slim lenses? See both on your own face in SpecFit.
Download SpecFitWhat is lens height?
Lens height is the size of one lens, top edge to bottom edge. It is measured at the tallest point.
- B measurement: the name opticians use. It comes from the boxing system.
- Lens depth: some shops use this name.
- In Japan: shops call it 天地幅, the top to bottom size.
Lens width (A) vs lens height (B)
The boxing system puts each lens in a box. A is its width, and B is its height.
| Size | What it is | On the arm? |
|---|---|---|
| A: lens width | One lens, side to side | Yes |
| B: lens height | One lens, top to bottom | Usually not |
| Bridge | The gap between the lenses | Yes |
| Temple | The arm, hinge to tip | Yes |
- Width sets the size: it decides how wide the frame is on your face.
- Height sets the look: it decides how much of your face the lens covers.
- They are not linked: two 54 mm lenses can be very different in height.
More on the three arm numbers in glasses frame numbers explained.
Why lens height is not on the arm
Look inside the arm. You will see three numbers, like 54□17 140.
- Three numbers: lens width, bridge and arm length. Most makers print only these.
- A fourth number: a few frames add it, like 54□17 140 32. The 32 is the lens height.
Where to find lens height
- The shop page: look in the size details. Look for “lens height”, “B” or “lens depth”.
- Ask the shop: a good optical shop can tell you.
- Measure a pair you own: see the steps below.
How to measure your own pair:
- Step 1: hold the glasses with the front facing you.
- Step 2: put a mm ruler on one lens, straight up and down.
- Step 3: find the tallest part of the lens.
- Step 4: read from the top edge to the bottom edge of the lens. Do not count the rim.
Like how a pair looks on you? Note its lens height and compare new frames to it.
Tall lenses vs slim lenses
Here is a rough guide. It is not a rule, and brands differ.
| Height | About | Often seen in |
|---|---|---|
| Slim | Under 30 mm | Slim rectangles, small ovals |
| Medium | 30 to 40 mm | Most everyday frames |
| Tall | Over 40 mm | Big squares, aviators, big rounds |
Here is the same woman in two frames. Look at her brows and cheeks.


How lens height changes your look
- Too slim: your brows sit far above the frame. The frame can look too small.
- Too tall: the lenses rest on your cheeks. They lift when you smile.
- Just right: the top rim follows your brows. Your cheeks stay clear.
This woman tried two light frames. The deeper one sits closer to her brows.


More on brows and frames in should sunglasses cover your eyebrows.
Long faces and short faces
- Long face: pick a tall lens. It fills more of the face, so less length shows.
- Short face: a slim lens keeps the face open.


More in best glasses for a long face.
When lens height matters most
Progressive lenses need room for three zones. The reading zone is at the bottom.
- Standard design: about 28 to 30 mm of lens height, at least.
- Short design: about 22 mm or more.
- Too slim: the reading zone gets cut off.
- Ask first: your optician knows the exact number for your lens.
Full details in minimum lens height for progressive lenses.
Strong prescriptions: a big lens is thicker at the edge. It is also heavier.
- Do not go too tall: pick only the height you need.
- Progressives and a strong lens: pick the slimmest frame that still clears the minimum.
More in best frames for a strong prescription.
See the height on your face in SpecFit
Numbers help you shortlist, but your face decides. SpecFit is a free iPhone app.
- Scan: the Face ID camera measures your face width in real mm.
- Fit check: paste a link to any pair. It scores the width against your face.
- Try-on: see the pair on your own photo. Check your brows and cheeks. A render costs one credit.


One quick scan on a Face ID iPhone. Then check any pair before you buy.
Download SpecFitQuestions
What is the B measurement on glasses?
It is the lens height. It is the size of one lens from top to bottom, in mm.
Why is lens height not on my glasses?
Most makers print only three sizes on the arm. Lens height is extra, so most leave it off.
What is a normal lens height?
Many glasses are about 30 to 40 mm tall. Slim frames are less, and big frames are more.
What is the minimum lens height for progressive lenses?
About 28 to 30 mm for a standard design. A short design needs about 22 mm.